Injection Molding PET Preform Production

Ultra Purge PET-E has been formulated to specifically clean injection molding machines that produce PET preforms. An innovative component allows Ultra Purge PET-E to be efficient during color changes and during the removal of black specks. The two problems are often related to each other and can be easily solved by using Ultra Purge during every color change or as a preventive maintenance with prescheduled frequency. Using Ultra Purge typically reduces production scrap by 40-60% and down time by 50-70%.

Ultra Purge PET-E can also be used to clean the hot runners with the mold open or closed. We highly recommend following our procedures and to contact us prior to the first usage for this application.

Ultra Purge PET-E is also distributed by Husky Injection Molding Systems. Ultra Purge can be directly purchased by calling your local Husky Spare parts center.

Please click on the link below to view an animated demo of how to use Ultra Purge:
Hot Runners with the Mold Open
Screw and Barrel

Please contact us for a free consultation and technical support.

Procedures and MSDS to clean screw, barrel and shooting pot
Ultra Purge PET-E

Purging procedures and MSDS to clean the hot runners
Ultra Purge PET-E

Cost Analysis